Kohler K-23098T-BNS 설치 지침 매뉴얼 - 페이지 7
{카테고리_이름} Kohler K-23098T-BNS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-23098T-BNS 13 페이지. Floor standing toilet
Kohler K-23098T-BNS에 대해서도 마찬가지입니다: 설치 지침 (27 페이지), 설치 지침 (25 페이지)
페이지 인쇄
4. Adjust the distance between centerline of PVC waste pipe
and the floor (wall) to match it consistent with marked
roughing-in.
Back
Installation
185
5. Move the toilet to the field and make sure the bottom
profile matches marked line on the ground.
6. Install the threaded rods through
the seat holes in the bowl. Tighten
bolts with hex wrench. Making sure
that they install correctly in the
holes in the floor.
It is suggested to use other auxillary
light such as torch to eluminate one
preserved installation hole of the
toilet. Watch the movement of the
threaded rod through the other
installation hole to better control the
installation process.
NOTE: Do not use white cement or
high lime content cements to install
this toilet. The expansion of cement
due to a rise in temperature may
make the toilet crack or cause
damage. Kohler is not responsible
for any damage caused by
installation with the use of cement.
1332802-T01-E
4.
Back
Installation
Finished
Floor
155
Fig.#5
5
5.
Fig.#6
6
-7-
PVC
UNIT mm
Finished
Floor
6.