Kohler Command 6 HP 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Kohler Command 6 HP에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Command 6 HP 17 페이지. Horizontal crankshaft
Kohler Command 6 HP에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

4. Saturate the precleaner with new engine oil.

Squeeze out all excess oil.

5. Reinstall the precleaner over the paper element.

6. Reinstall air cleaner cover.

7. Tighten the air cleaner cover retaining knob.

Service Paper Element

Every 100 hours of operation (more often under

extremely dusty or dirty conditions), replace the paper

element.

1. Loosen air cleaner cover retaining knob and remove

the cover.

2. Remove the precleaner from the paper element.

3. Remove the air cleaner cover ring, wing nut,

washer, and element cover with grommet. Pull the

element cover with grommet off. Remove paper

element.

4. Replace a dirty, bent, or damaged element with a

genuine Kohler element. Do not wash the paper

element or use pressurized air, as this will

damage the element. Handle new elements

carefully; do not use if the sealing surfaces are

bent or damaged.

Air Cleaner

Base

Figure 9. Air Cleaner Elements.

5. When servicing the air cleaner, check the air

6. Install new or serviced paper element and

Precleaner

Paper

Element

Cover

cleaner base. Make sure it is secured and not bent

or damaged. Also check the air cleaner element

cover for damage or improper fit. Replace all bent

or damaged air cleaner components.

components as follows:

a. Position paper element on base.

b. Slide element cover with grommet then

washer onto stud, secure with wing nut.

c. Reinstall the precleaner over the paper

element.

d. Reinstall air cleaner cover ring into element

cover.

e. Reinstall air cleaner cover and secure with the

retaining knob.

Air Cleaner

Cover Ring

Washer

Grommet

Wing Nut

Air Cleaner

Cover

Retaining Knob