Kohler COMMAND PRO CS10 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Kohler COMMAND PRO CS10에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler COMMAND PRO CS10 21 페이지. Horizontal crankshaft
Kohler COMMAND PRO CS10에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)

페이지 인쇄

Storage

If the engine will be out of service for two months or

more, use the following storage procedure:

1. Clean the exterior surfaces of the engine.

2. Change the oil while the engine is still warm from

operation. See "Change Oil" on page 9.

3. The fuel system must be completely emptied, or

the gasoline must be treated with a stabilizer to

prevent deterioration. If you choose to use a

stabilizer, follow the manufacturers

recommendations, and add the correct amount for

the capacity of the fuel system. Fill the fuel tank

with clean, fresh gasoline. Run the engine for 2-3

minutes to get stabilized fuel into the carburetor.

To empty the system, run the engine until the tank

and system are empty.

4. Remove the spark plug. Add one tablespoon of

engine oil into the spark plug hole. Install the plug,

but do not connect the plug lead. Crank the engine

two or three revolutions.

5. Remove the spark plug. Cover the spark plug hole

with your thumb, and turn the engine over until the

piston is at the top of its stroke. (Pressure against

the thumb is greatest.) Reinstall the plug, but do

not connect the plug lead.

6. Store the engine in a clean, dry place.

Parts Ordering

The engine Specification, Model, and Serial Numbers

are required when ordering replacement parts from

your Kohler Engine Service Dealer. These numbers are

found on the identification plate which is affixed to the

engine shrouding. Include letter suffixes if there are

any. See "Engine Identification Numbers" on page 5.

Always insist on genuine Kohler parts. All genuine

Kohler parts meet strict standards for fit, reliability, and

performance.

Major Repair

Major repair information is available in Kohler Engine

Service Manuals. However, major repair generally

requires the attention of a trained mechanic and the

use of special tools and equipment. Your Kohler

Engine Service Dealer has the facilities, training, and

genuine Kohler replacement parts necessary to

perform this service. For Sales & Service assistance

call 1-800-544-2444 (U.S. & Canada) or contact your

Kohler Engine Dealer or Service Distributor, they're in

the Yellow Pages under Engines-Gasoline.

Model Designation

Model CS4T for example: C designates Command

engine, S designates slanted cylinder configuration,

and 4 designates horsepower. A suffix letter designates

a specific version as follows:

Suffix

Designates

Retractable Start

Electric Start

Tapered Crankshaft

Threaded Crankshaft

Gear Reduction (2:1 or 6:1)