Kohler 12RESL 운영 매뉴얼 - 페이지 25

{카테고리_이름} Kohler 12RESL에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 12RESL 48 페이지. Residential/commercial generator sets
Kohler 12RESL에 대해서도 마찬가지입니다: 설치 매뉴얼 (40 페이지), 매뉴얼 (36 페이지), 설치 매뉴얼 (36 페이지), 운영 (48 페이지)

페이지 인쇄

3.4 Spark Plugs

Reset the spark plug gap or replace the plugs with new

plugs as necessary.

1. Clean the area around the base of the spark plug to

keep dirt and debris out of the engine.

2. Remove the spark plug and check its condition.

Replace the spark plug if it is worn or if its reuse is

questionable.

3. Check the spark plug gap using a wire feeler

gauge. Adjust the gap to 0.76 mm (0.030 in.) by

carefully bending the ground electrode.

Figure 3-4 and Figure 3-5.

Figure 3-4 Checking the Spark Plug Gap

Figure 3-5 Adjusting the Spark Plug Gap

TP-6517 1/11

3.5 Air Cleaner Element and

Precleaner

The engine has a replaceable high-density paper air

cleaner element with an oiled foam precleaner. See

Figure 3-6.

Check for a buildup of dirt and debris around the air

cleaner system. Keep this area clean.

Note: Operating the engine with loose or damaged air

cleaner components could allow unfiltered air

into the engine causing premature wear and

failure.

See

1--514

1--511

1. Cover knob

2. Air cleaner cover

3. Element cover nut

4. Element cover

Figure 3-6 Air Cleaner Components

Section 3 Scheduled Maintenance, 12 kW Models

586536

5. Foam precleaner

6. Air cleaner element

7. Air cleaner base