Kohler 16.5EFKOZD 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Kohler 16.5EFKOZD에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 16.5EFKOZD 12 페이지.
Kohler 16.5EFKOZD에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지)

1. Mounting bracket, rear/alternator end (GM93411), screws

(M933-08020-SS qty. 2), and washers (X-25-139 qty. 2)

2. Side mounting bracket, non-service side (GM89786, or

GM90529, or GM90530, or GM93637), screws

(M933-08020-SS qty. 3), and washers (X-25-139 qty. 3)

3. Mounting bracket, engine end (GM93616), screws

(M933-08020-SS qty. 2), and washers (X-25-139 qty. 2)

4. Side mounting bracket, service side (GM89786, or

GM90529, or GM90530, or GM93637), screws

(M933-08020-SS qty. 3), and washers (X-25-139 qty. 3)

5. Round bushings (X-634-28 qty. 2) for customer load

leads.

Figure 3 Sound Shield Base Mounting Position

1.9

Remove and discard the belt guard brackets

(GM90741, GM90701, and GM90702) to remove

the belt guard (GM90698). See Figure 4.

1. Bracket, belt guard (GM90741)

2. Bracket, belt guard (GM90702)

3. Bracket, belt guard (GM90701)

4. Wing screw and belt guard mounting hardware (qty. 3)

5. Belt guard (GM90698)

Figure 4 Belt Guard

1.10 Remove and discard the end bracket panel

(GM87127) and alternator air-exhaust guard

(GM90786). Save the hardware. See Figure 5.

TT-1651 4/17a

GM89517-C

1. End bracket panel (GM87127)

2. Alternator air-exhaust guard (GM90786)

Figure 5 End Bracket Components

1.11 Replace the existing end bracket panel with

alternator air intake duct (GM90676) and

alternator air intake duct (GM89976) using 4

screws (X-6216-1) and the existing hardware to

secure. See Figure 6.

1. Alternator air intake duct (GM90676)

2. Alternator air intake duct (GM89976) and screws (X-6216-1

qty. 4)

3. U-channel (X-6047-14)

Figure 6 Alternator Air Duct Assembly

GM89517-J