Kohler 20EFKOZD 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Kohler 20EFKOZD에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 20EFKOZD 8 페이지.
Kohler 20EFKOZD에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)

페이지 인쇄

Inspection/Maintenance

Service the siphon break during regular exhaust system

component inspection. See the generator set operation

manual for the service schedule.

Note: The generator set must not be running during the

siphon break inspection.

Remove the generator set from service.

1.1

Press

the

generator

OFF/RESET button.

1.2

Disconnect the power to the battery charger, if

equipped.

1.3

Disconnect the generator set engine starting

battery, the negative (--) lead first.

Inspect the siphon break.

2.1

Remove the retaining cap and remove the reed

valve for inspection. See Figure 6.

2.2

Use a mild detergent to remove residue and

oxidation from the reed valve.

2.3

Clear blockage from the reed valve opening.

2.4

Replace the siphon break if the reed valve is

cracked or if the reed valve material has hardened

or deteriorated.

2.5

Install the reed valve into the mounting base with

the valve downward. See Figure 6, item 2.

2.6

Install and only finger tighten the retaining cap. Do

not overtighten it.

set

master

control

1. Cap

2. Siphon reed valve

3. Mounting base

Figure 6 Siphon Break

Restore the generator set to service.

3.1

Check that the generator set is OFF.

3.2

Reconnect the generator set engine starting

battery, the negative (--) lead last.

3.3

Reconnect the power to the battery charger, if

equipped.

TT-1664

6/15