acaia AP009 사용자 설명서 - 페이지 16
{카테고리_이름} acaia AP009에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia AP009 18 페이지.
페이지 인쇄
Error Codes
Error Code
Description
Access code error, unrecognized access code.
Error 100
EEPROM error, unable to access memory. Please contact Acaia support.
Error 101
AD error, unable to access weighing signal. Please contact Acaia support.
Error 102
Unable to find acceptable starting zero point, most likely because the loadcell
Error 303
has been damaged by excessive force or drop. Please contact Acaia support.
Overload: weight exceeds maximum capacity.
Underload: weight below minimum capacity.
Calibration error. Calibration cannot proceed when environmental noises are too
Error 304
strong. Please calibrate in a stable environment free of wind, vibration, etc.
Unable to tare because the weight exceeds the acceptable tare range.
Error 802
Unable to tare because the weight is unstable.
Error 803
Passcode error (the default passcode is 0000)
Error 900
Other
Display Code Description
The scale is in update mode. During the update process, the data transfer
indicator on the bottom left will flash.
UPdAtE
* Note: If you want to leave update mode, please connect the scale's USB to a
power source. The scale will power off automatically if the update process does
not begin shortly.
16