acaia AP009 사용자 설명서 - 페이지 5

{카테고리_이름} acaia AP009에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia AP009 18 페이지.

Product Care Information

You can charge the battery by plugging the USB Type-C

cable into any of the power supplies listed below:

• A computer

• A USB wall-charger with an output of 5 volts and 1 amp

• A USB-C PD charger supporting 5 volts

• A DC car-charger with an output of 5 volts and 1 amp

• It takes about 1-2 hours to fully charge the battery when the battery is empty. Try not to

let the battery completely run out before charging. Charge the battery as needed.

• A fully charged battery can work continuously for about 30 hours.

• Remaining battery power can be viewed when the scale is off by pressing and holding the

Power button until the Battery Indicator comes on. You can also check the battery power by

connecting the scale to Acaia Apps.

* Note: The Acaia Pearl is equipped with charging protection to prevent the battery from charging

under high temperatures. It is normal if the scale does not charge when the surface is hot from

brewing coffee. Battery charging function will be enabled once the scale has cooled.

• Press and hold the Power button while the LED display shows [ ACAIA ] and then changes

to [ SEt ]. Continue to hold the Power button until the battery percentage is displayed.

Turn on scale

Turn on the Acaia scale.

Tap Tare button

Make sure the scale is

in Weighing Only Mode

and the unit is set to

'gram', then tap the 'T'

button rapidly.

See CAL display

Keep tapping the 'T'

button until 'CAL' is

shown on the display.

Place a weight

(100g/500g/1000g)

on the scale and wait

until the display shows

'_End_'. Calibration is

now complete!