Kohler KDI 1903M 소유자 매뉴얼 - 페이지 22

{카테고리_이름} Kohler KDI 1903M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler KDI 1903M 40 페이지. Diesel kdi
Kohler KDI 1903M에 대해서도 마찬가지입니다: 소유자 매뉴얼 (38 페이지), 소유자 매뉴얼 (50 페이지), 사용 및 유지 관리 (42 페이지)

페이지 인쇄

1. Engine Specifications

4.6 Coolant filling

• Before proceeding with operation, read

NOTE:

Before proceeding with any operation on

the engine, stop it and allow it to cool.

• Presence of steam pressurized coolant danger of burn.

1. Loosen the cap A and fill the radiator with coolant

composed of: 50% ANTIFREEZE and 50% decalcified

water.

2. Top liquid up until the pipes inside the radiator are covered

by about 5 mm. Do not overfill the radiator, but leave room

for the coolant to expand.

3. For engines equipped with expansion tank, pour in fluid

until reaching the max level mark.

4. Loosen the screw C, release any air and tighten the screw

C (Tightening torque of 8 Nm - Fig. 4.7).

5. Re-tighten the cap A.

6. After a few hours of operator, stop the engine and allow

the liquid to cool returns to a ambient temperature and

check the coolant level again.

4.6

INFORMATION ABOUT USE

Important

Par.

3.2.2.

Warning

• An anti-freeze protection liquid (ANTIFREEZE) - mixed with

decalcified water - must be used.

• The freezing point of the refrigerant mixture depends on

the amount concentration in water.

• As well as lowering the freezing point, the antifreeze also

raises the boiling point.

• A 50% mixture is recommended to ensure a general level

at protection prevents the formation of rust, galvanic

currents and calcium deposits.

4.4

4.5

4.7

ED0053029510

_14

Index