Kohler 2454 설치 및 사용자 설명서 - 페이지 8

{카테고리_이름} Kohler 2454에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 2454 24 페이지. Vanity cabinets and mirrors

If necessary, fit suitable fixings into the wall depending on the wall

structure.

Secure the vanity cabinet flush against the wall by tightening the fixing

screws. Additional screws may be used, if required.

10. If applicable to your model, cut the wood trim, then attach it around the

bottom perimeter of the vanity cabinet using suitable finishing nails.

Apply a suitable wood filler to the top of each nail hole.

11. If possible and applicable, install the tap to the vanity basin before

installing the vanity basin to the vanity cabinet.

12. Install the vanity basin.

instructions.

13. If applicable to your model, place a shelf pin into the mounting hole at

each corner inside the vanity cabinet. Fit the shelf to rest on the pins.

14. Refit the drawers and doors.

15. Install the decorative cabinet hardware opposite the hinged side of

the door(s). Refer to the decorative cabinet hardware manufacturer's

installation instructions.

16. Make adjustments to the door(s), hinges and drawers as required.

Refer to the applicable sections.

Refer to the vanity basin manufacturer's

1067217-W2-B