Kohler 2460 설치 및 사용자 설명서 - 페이지 11
{카테고리_이름} Kohler 2460에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 2460 24 페이지. Vanity cabinets and mirrors
페이지 인쇄
4.
Open and close the door to confirm smooth operation. Adjust the
screws on the hinge assembly as needed.
Adjustment
5.
Height - to move the door up or down -Turn the screw either way
on the bottom and top hinge assembly until correct adjustment is
achieved.
6.
Side - to move the door to the left or right -Turn the screw either
way on the bottom and top hinge assembly until correct adjustment is
achieved.
7.
Depth - to move the door in or out -Loosen the screw on the bottom
and top hinge assembly, hold the door in the desired position, then
retighten the screws.
Remove/Replace the Hinges
Side of Vanity
Removal
1.
For a bottom hinge - Remove the cover plate from the hinge base
by sliding the cover plate out towards you, then away from the hinge
base.
2.
For a top hinge - Refer to the section "Remove/Adjust the Quiet Close
Assembly" then proceed with the removal procedure for both hinges.
Top of Door
Bracket
Latch
Hinge Base
Hinge Cup
Slot
Tab
11
Cover Plate
1067217-140
1067217-W2-B