Kohler CLC3526FS 사용 설명서 - 페이지 4

{카테고리_이름} Kohler CLC3526FS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler CLC3526FS 20 페이지.

Fig. 4B & 4C

3. Attaching Side Kits to a Surface Mounted Cabinet

1. Apply foam tape to Side kit bracket

A. Peel tape from sheet, leave liner on.

B. Apply as shown to side kit brackets,

be sure they are clean and dry.

C. DO NOT PEEL RELEASE LINER

UNTIL YOU HAVE TEST FIT THE

SIDE KITS ON THE CABINET!

2. Attach the side kit brackets to the

cabinet as shown in Fig. 6

3. Test fit the side kits, then clean the

back of the side kits with rubbing alcohol.

4. Peel the release tape from the

brackets and apply the side kits, push

firmly to set.

5. Cover the screw heads with the screw caps.

Fig. 5

Once Screw is bottomed out on

mount clip, turn screw an additional

5 to 7 turns to fully expand the anchor.

Side view at top of cabinet

Fig. 6

Align top of side kit with top of flange

Side kit bracket

(Fits tight under the

flange of cabinet)

#8 x 3/8" screws

self thread into

Side Kit brackets

209-1023 CLC Cabinets

2 pieces

26" high