Kohler K-45773T 설치 매뉴얼 - 페이지 3

{카테고리_이름} Kohler K-45773T에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-45773T 8 페이지. Bristol series bathroom cabinets

1. After unpacking, screw out adjustable feet (see Fig.3).

Place the cabinet at a desired position in the bathroom,

and then adjust the four adjustable feet to put the cabinet in

place.

Go up

2. Pre-drill the floor drainage hole if the bathroom is suitable

for floor drainage.

Position the cabinet against the finished wall.

Mark the drain location on the bottom panel. Move the

cabinet away from the wall.

Drill floor drainage hole on the bottom panel with a

suitable drill.

Put the cabinet against the wall and align the drainage

hole with the drainage pipe.

3. Take out the handle, buffer and shelf support to prepare

for installation.

Install the handle and buffer as shown in the picture below.

· Install the shelf support to the desired height as shown in

the picture below, and put the adjustable shelf downwards

and clip into place.

1202483-T01-B

Go down

Fig.3

-3-

Fig.4

Fig.5