Kohler K-97630 설치 및 관리 매뉴얼 - 페이지 2

{카테고리_이름} Kohler K-97630에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-97630 29 페이지. Locker
Kohler K-97630에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (29 페이지)

Tools and Materials

R E

T U

N A

H O

D E

C O

A L

Denatured Alcohol

Caulk Gun

WARNING: Risk of serious injury. When cutting the locker unit, take appropriate safety measures

including the use of breathing protection.

CAUTION: Risk of serious injury. Always wear safety glasses while cutting and drilling.

IMPORTANT! Dust will be generated when cutting the locker unit. Cutting the locker should be

performed outside or in a well ventilated area.

IMPORTANT! Leave this manual for the end user.

Read these instructions before installing or using this product:

• The locker unit must only be trimmed in height. Do not cut down the sides.

• The existing rough walls must be within 3/8" (10 mm) of plumb.

• The locker unit must be braced using 2x4's around the entire unit.

• Use color matched silicone sealant around the locker unit.

• Cover the shower base with a drop cloth or other protective material to avoid damage.

• Follow the construction adhesive and silicone sealant instructions for application and curing time.

• Inspect product for damage after unpacking, prior to installation.

• A router may be used to cut the locker unit. The router bit will dull quickly.

1248926-2-A

Sanding Block

7-1/4" Circular Saw

and Fine Toothed Blade

1-2 Tubes Color Matched

100% Silicone Sealant

Rags

4+ tubes Non-Solvent

Based Construction Adhesive

Breathing

Protection

Shop Vacuum

Plus:

• Standard Woodworking Tools

• Spring Loaded Braces or Lumber

(to create bracing)

• Sawhorses

• Drop Cloth

Kohler Co.