Kohler K-97631 설치 및 관리 매뉴얼 - 페이지 4

{카테고리_이름} Kohler K-97631에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-97631 29 페이지. Locker
Kohler K-97631에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (29 페이지)

2. Measure and Trim the Locker

IMPORTANT! It is recommended the locker unit be cut using a circular saw and a ﬁne toothed blade.

IMPORTANT! Do not cut the sides of the locker unit. Only trim the top or bottom to ﬁt your wall length.

IMPORTANT! The locker unit must be placed with the shelf grooves angled upward. If the locker unit is

placed upside down the shelves will fall out.

Measure the vertical installation area to determine the cut dimensions for the locker unit.

Mark the cut lines on the back side of the locker unit.

NOTE: Remove any protective ﬁlms on the locker unit surface before cutting.

Cut the locker unit to the required dimensions.

IMPORTANT! It is critical the locker unit is clean for a strong bond to be created by the adhesive.

Remove excess material and sand any rough edges using a sanding block.

Clean the back of the locker unit with denatured alcohol.

1248926-2-A

Kohler Co.