Kohler TRESHAM K-45980T-R 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Kohler TRESHAM K-45980T-R에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler TRESHAM K-45980T-R 7 페이지. Tresham series washbasin cabinet

INSTALLATION

Install the services.

Hot (H) and Cold (C) inlets must be connected to the correct

inlet pipes.

Install the drain in accordance with the manufacturer s

instructions.

We suggest using P-trap drain. Connect P-trap pipe with

washbasin drain.

CAUTION!

Make sure a watertight seal exists on all

washbasin drain connections.

CAUTION!

Provide access to the plumbing

connections for future plumbing maintenance.

NOTE:

The hot and cold water supplies must be installed with

isolating valves.

Install the water supply and drain lines according to the

roughing-in information provided with your lavatory. The

water supply nipples must extend at least 76mm beyond

the finished wall material.

Complete the finished wall. Make sure the finished wall is

straight and plumb, and the floor is flat and perpendicular

to the finished wall.

IMPORTANT!

Do not install any moldings that may inhibit the

vanity from being plumb against the finished wall.

1188934-T01-B

(H)

(C)

76mm

-3-