Kohler Vanity K-2604 설치 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Kohler Vanity K-2604에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Vanity K-2604 37 페이지. Vanity
Kohler Vanity K-2604에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (41 페이지)

페이지 인쇄

Back Rail

Pilot Hole

Washer

Lag Bolt

2. Secure the Vanity

CAUTION: Risk of property damage. Use care when

moving the vanity to avoid impacting, sliding, or

side-loading the legs.

CAUTION: Risk of property damage. Select 250 lb (113.4

kg) load bearing 5/16" lag bolts with a length that can safely

clear obstacles in the wall and 5/16" washers. Calculate the

proper length of the lag bolts by adding the following: 1-1/2"

(38 mm) backing material + wallboard thickness + back rail

thickness.

With assistance, lift and place the vanity in position against the

ﬁnished wall. Do not drag the vanity into position.

Verify the vanity is level and the back rail is plumb against the

wall. If necessary, turn the leveler(s) to adjust the unit.

Using a 1/4" drill bit, drill two pilot holes through the back rail

and the ﬁnished wall. Verify the pilot holes are positioned to

ensure the lag bolts will engage the 2x6 backing material.

Secure the vanity to the ﬁnished wall with two 5/16" lag bolts

and washers (not provided).

Kohler Co.

Finished Wall

Leveler

1207226-2-A