acaia Pearl S 사용자 설명서 - 페이지 10

{카테고리_이름} acaia Pearl S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia Pearl S 18 페이지. Coffee scale
acaia Pearl S에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

Mode 4 - Espresso Mode

start the timer function; the timer stops when the flow of espresso into the vessel stops.

When the vessel is removed from the scale, the display flashes the final beverage weight.

Display

1. The LED display shows [0:00 0.0] with the timer on the left and the weight on the right in

gram units.

2. The LED display shows [0:00 0.00] with the timer on the left and the weight on the right

in ounce units.

3. When the weight exceeds 999 grams, the LED display only shows the integer part (the

decimal point will not be displayed. The LED display shows up to a maximum of 3000

grams. If the weight exceeds 3000 grams, the scale will display [Maximum].

Mode Description

1. When placing more than two grams and a stable weight on the scale, the scale will

perform the auto-tare operation.

2. After the scale detects the flow of espresso, the timer will start. The timer will stop when

the espresso flow stops.

3. When the espresso is ready, removing the cup will flash between the beverage weight

and the espresso shot.

Action

Start/Stop/Reset Timer

Tare Weight

Reset Mode

Toggle Units g/oz

Switch Mode

Note

1. In Espresso Mode, the timer will stop when the espresso flow stops.

2. The auto-tare function is performed only when the weight exceeds two grams.

3. If you do not operate the scale for ten seconds, it will reset the timer and perform

tare operation.

4. In Espresso Mode, the timer will also stop when a negative weight (i.e., removal of

a cup) is detected.

The Espresso Mode is designed to aid espresso

extraction. The scale automatically detects a cup,

shot glass, or other vessel and tares the weight of

the vessel. The scale will then detect the start of the

flow of espresso into the vessel and automatically

Operation

Tap Power button

Tap Tare button

Double tap Tare

Long press Tare for 5 seconds

Press and hold Power button