acaia Pearl S 사용자 설명서 - 페이지 16

{카테고리_이름} acaia Pearl S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia Pearl S 18 페이지. Coffee scale
acaia Pearl S에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

LED Indicators

Battery Charge

Tare Operation

Battery charge / Charge error

The orange indicator on the upper left turns on when the battery is charging and turns off

when the battery is fully charged. The indicator starts flashing or does not appear when the

USB cable is not working.

Tare operation

The orange indicator on the lower left turns on when the Tare button is pressed.

Ounce Indicator

The green indicator on the upper right turns on when the weighing unit is in ounces.

Espresso Mode indicator

The green indicator on the lower right turns on when in Espresso Mode.

Error Code

Description

Access Code Error, unrecognized access code.

Error 100

EEPROM error, unable to access memory. Please contact Acaia support.

Error 101

AD error, unable to access weighing signal. Please contact Acaia support.

Error 102

Unable to find acceptable starting Zero point, most likely due to the loadcell

Error 303

has been damaged by excessive force or drop. Please contacat Acaia

support.

Over load: the weight is over the maximum capacity.

maximum

Under load: the weight is under the minimum capacity.

underload

Error 304

Calibration error. Calibration cannot proceed when environmental noises are

too strong. Please calibrate in a stable environment free of wind, vibration, etc.

Unable to tare because the weight exceeds the acceptable tare range.

Error 802

Unable to tare because the weight is unstable.

Error 803

Others

Display Code Description

The scale is in update mode. During the update process, the orange LED will

blink until it is completed.

UPDATE

Note: If you want to leave update mode, please connect the scale's USB to a

power source.

Ounce Indicator

Espresso Mode Indicator