acaia AO101 사용자 설명서 - 페이지 8

{카테고리_이름} acaia AO101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia AO101 15 페이지.
acaia AO101에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

Mode 2 - Auto Dosing Mode

Auto dosing mode can dose automatically whenever a container is placed on the platform. There

will be an 'A' indicator on the top left corner of the display when in Auto mode.

At the end of auto dosing, you may short press the Dose button to 'pulse' a few more coffee

beans if required. A [ rEADY ] message will show on the display when auto dosing mode is in

action. To leave the [ rEADY ] display, short press the Power button. You will be able to return to

the preset selection display.

Action

Enter Ready State

Start Dosing

Stop Dosing

Pulse Beans

Reset Mode

Display

rEADY

1. Switch into automatic dosing mode by long pressing Power and selecting the Auto mode with the

Dial. Press Power again to confirm the mode.

2. Select or adjust a preset weight.

3. Press Dose to start automatic dosing, the display will show [ rEADY ].

4. To start the first dose, press Dose again and the automatic dosing will begin.

5. Remove the completed dose, and wait for the display to show [ rEADY ] again.

6. Place another container on top of the platform and dispensing will start again.

7. Press Power to set a different dose and leave the current auto dosing session.

• Auto dosing mode can dose automatically whenever a container is placed on the platform.

• There will be an 'A' indicator on the top left corner of the display when in Auto mode.

• A [ NO ISE ] message will show when a container is removed from the Orion or the platform is

touched during dosing. Please dose again.

Pulse in Auto dosing mode

The pulse function also works in the auto dosing mode. To pulse (or add) a few more beans at the

end of each dose, simply press the Dose button and the Orion will add a small amount of beans with

each press. If one press does not dispense any beans, you can press it multiple times until the desired

weight is reached.

Operation

Short press Dose

Short press Power

Description

Place container on the platform; dosing will start when weight is

detected