acaia ORION BEAN DOSER 운영 매뉴얼 - 페이지 9

{카테고리_이름} acaia ORION BEAN DOSER에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia ORION BEAN DOSER 15 페이지.
acaia ORION BEAN DOSER에 대해서도 마찬가지입니다: 운영 매뉴얼 (11 페이지)

페이지 인쇄

1. Chapter 3: Operations

Action

Pulse Beans

Reset Mode

Display

EAD

1. Switch into automatic dosing mode by long pressing Power and selecting the Auto mode with

the Dial. Press Power again to conﬁrm the mode.

2. Select or adjust a preset weight.

3. Press Dose to start automatic dosing, the display will show [ rEAD

4. To start the ﬁrst dose, press Dose again and the automatic dosing will begin.

5. Remove the completed dose, and wait for the display to show [ rEAD

6. Place another container on top of the platform and dispensing will start again.

7. Press Power to set a different dose and leave the current auto dosing session.

• Auto dosing mode can dose automatically whenever a container is placed on the platform.

• There will be an 'A' indicator on the top left corner of the display when in Auto mode.

• A [ NO IS

] message will show when a container is removed from the Orion or the platform is

touched during dosing. Please dose again.

Pulse in Auto dosing mode

The pulse function also works in the auto dosing mode. To pulse (or add) a few more beans at the

end of each dose, simply press the Dose button and the Orion will add a small amount of beans

with each press. If one press does not dispense any beans, you can press it multiple times until the

desired weight is reached.

Operation

Short press Dose; this action can be repeated several times

Short press Power to return to preset selection display

Action/Description

Place container on the platform; dosing will start when weight is detected

] again.