acaia AO101 사용자 설명서 - 페이지 6
{카테고리_이름} acaia AO101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia AO101 15 페이지.
acaia AO101에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)
페이지 인쇄
Operations
Basic Operations
Action
Turn On Scale
Turn Off Scale
Toggle Presets
Set Preset Weight
Switch Mode
Start Dosing
Reset Mode
Empty Hopper
Stop Emptying Hopper
In the main display menu, you may use the controls above to choose between presets, enter
different dosing modes, or start dosing with the current mode.
Set Preset Weight
Action
Enter Preset Weight
Setting
Change Value
Save Preset Value
There are 3 presets in the Orion for storing desired weights. For example, you can set preset 1 at
18 g for dosing, preset 2 at 20 g, and preset 3 at 35 g. You may adjust the preset value with the
controls above.
Switch Mode
Action
Enter Mode Setting
Switch Mode
Set Mode
There are 2 different modes in the Orion for operation — Manual dosing mode and Auto dosing
mode. You may set different modes using the controls above.
Empty Hopper
Action
Empty Hopper
Stop Emptying
Back to Preset
To empty the bean hopper, you can press and hold the Dose button. The Orion will continuously
dispense the beans until you press the Dose button again to stop. Make sure you place a large
container on the platform for this operation.
There will be an 'E' indicator on the top left corner of the display when emptying the hopper.
Operation
Press Power
Double press Power
Rotate Dial
Press Power, rotate Dial, then press Power / Dose
Press and hold Power, rotate Dial, then press Power / Dose
Press Dose
Press Power
Press and hold Dose
Press Dose
Operation
Press Power
Rotate Dial
Press Power / Dose
Operation
Press and hold Power
Rotate Dial
Press Power / Dose
Operation
Press and hold Dose
Press Dose
Press Power
6