acaia ORION BEAN DOSER 운영 매뉴얼 - 페이지 11

{카테고리_이름} acaia ORION BEAN DOSER에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia ORION BEAN DOSER 11 페이지.
acaia ORION BEAN DOSER에 대해서도 마찬가지입니다: 운영 매뉴얼 (15 페이지)

페이지 인쇄

Action

Enter Unit Settings

Toggle Unit Options

4.5 About

Action

Enter Set Menu

Enter Unit Settings

Chapter 5: Calibration

5.1 Calibrating the Orion

In weighing mode, press the Dose button 5 times to enter the user calibration mode.

Place a 500 g calibration weight on the platform and allow the Orion to calibrate.

1. While the Orion is in Weighing Mode and the weighing unit is in gram, press the Dose

button quickly multiple times until LED display shows [ CAL ] and then [ 500 ].

2. Place a 500 g calibration weight on platform and wait for the scale to execute

calibration procedure.

3. The Display shows [ -End- ] when the calibration procedure is completed.

4. Remove the calibration weight from the platform when calibration is completed.

* Note: Calibration weights of 100 g, 1000 g, 1500 g, 2000 g, and 3000 g can also be

used to calibrate the Orion.

processed, duplicated or published in any form by photocopying, microfilming, reprinting or any other method, in

particular electronic means, without the written agreement of Acaia.

Operation

When Unit is displayed, short press Dose to enter Unit menu.

Rotate the dial to toggle between unit options: g (gram) and oZ (ounce).

Short press Dose to confirm.

Operation

Long press Power and rotate the dial to SEt. Press Dose to enter Settings

menu.

When About is displayed, short press Dose to display the firmware

version.