Aqara Magic Switch S1E 매뉴얼 - 페이지 8

{카테고리_이름} Aqara Magic Switch S1E에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqara Magic Switch S1E 19 페이지.

Please select the corresponding platform to scan the code

to access the network. If you have been connected to the

network before, you need to reset the device if you switch

to another platform to connect to the network. After

resetting the network according to the prompts, scan the

code to access the network.

Please connect the mobile phone as close to the device as

possible, and make sure that the mobile phone and the

device are on the same Wi-Fi network (2.4GHz).

Open the Aqara Home App, click the "+" in the upper right

corner of the homepage, select "Magic Switch S1E", and

follow the instructions of the App.

* If you use HomeKit to add devices, you need to scan the

HomeKit QR code on the screen or manually enter the setup

code to add according to the prompts on the screen of the

App and the device.

If the adding fails, please select Retry on the device and try

adding again on the App. For assistance please check:

www.aqara.com/support.

If the device addition fails, please confirm the following:

* Please make sure the device is connected to a 2.4GHz Wi-Fi

network;

* The Wi-Fi name or password contains unsupported special

characters, resulting in failure to connect to the