2SAN ADR-7104 빠른 설치 매뉴얼 - 페이지 9
{카테고리_이름} 2SAN ADR-7104에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2SAN ADR-7104 15 페이지.
페이지 인쇄Install Internal HDD：
1.
Remove the cover and pull the hot-swap HDD tray out.
2.
Disconnect the SATA cable & 4-pin HDD power cord.
3.
Loosen the screws and take the HDD bracket out.
4.
Install the HDD into the lower part of the HDD bracket and tighten it. Make sure the HDD is firmly
connected with SATA connector.
5.
Put the HDD bracket back, and make sure to fasten the screws firmly.
6.
Put the hot-swap HDD tray back.
9