a-TroniX 9887579 설치 및 운영 지침 매뉴얼 - 페이지 15
{카테고리_이름} a-TroniX 9887579에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. a-TroniX 9887579 16 페이지. Mppt solar charge controller
페이지 인쇄
Machine Translated by Google
operation manual
MPPT solar charge controller X45/10
12. Security Features
mistake
short circuit
overcurrent
countercurrent
Overvoltage Max. 45V
undervoltage
Overtemperature The controller cuts off the load when the temperature reaches the set value.
*1 Controller can protect itself, but the load might be damaged.
*2 The battery must be protected by a fuse.
ATTENTION:
The combination of different error states can lead to damage to the controller. Always
troubleshoot first before reconnecting the controller.
13. Specifications
a-TronlX MPPT solar charge controller X45/10
battery parameters
Max charge current
Mains voltage
Max. voltage at battery terminal Battery
type
MPPT charge voltage
Voltage boost
Equalize voltage
Wet,
Float Voltage Low.
gel
Disconnect Power on again
and
AGM
Temperature compensation
02/2022
status
Protected *1
Protected
–
Protected
–
cause
remedy
Protected
Protected *1
Protected *2
Turns off immediately
–
Switches off with a delay
–
Max. 25V
–
Switch off
10A
12V
25V
Lithium, Wet, Gel, AGM (Default: Gel)
<14.5V 25
14.0-14.8V (programmable, default: 14.5V@25°C)
14.0-14.8V (programmable, default: 14.8V@25°C)
13.0-14.5V (programmable, default: 13.7V@25°C)
10.8-11.8V, SOC1-5 (programmable, default: 12V)
11.4~12.8V (programmable, default: 12V)
15.5V
-4.17mV/K per cell (boost, equalization), -3.33mV/
K per cell (float)
–
–
Item No. 9887579
page 15