a-TroniX 9887579 설치 및 운영 지침 매뉴얼 - 페이지 7

{카테고리_이름} a-TroniX 9887579에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. a-TroniX 9887579 16 페이지. Mppt solar charge controller

Machine Translated by Google

operation manual

MPPT solar charge controller X45/10

4. Dimensions

Make sure the cable lengths between the

battery and the controller are as short as

possible. Make sure that the cable cross-

section is sufficient and that you connect

it in the correct order:

1. First connect the load with the

corresponding cables

(positive pole=red (1) // negative pole=black (2)).

Then isolate them with a suitable insulating

tape (not included).

2. Then connect the battery.

It applies again

(positive pole=red (3) // negative pole=black (4)).

The load should now be switched on.

3. Connect the solar panel with the positive

cable (5) and the negative cable (6).

The controller starts

charging.

4. Check the status of the

LED display (see section 10).

02/2022

page 7