AQTRONIC THC102MX 운영 매뉴얼
{카테고리_이름} AQTRONIC THC102MX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQTRONIC THC102MX 5 페이지. Cnc plasma torch height controller
페이지 인쇄THC102MX
CNC PLASMA Torch Height Controller
Safety P-recautions
Enviroment cannot contain any explosive gas.
It must be wired by professional wiring staff. Otherwise, it may cause electronic
shock.
Cut off the power supply before wiring. Otherwise, it may cause electronic shock.
Do not touch any control port, internal boards and their electronic componets
while the electricity is turned on. Otherwise, it may cause electronic shock.
Device information
The unit is a modern analogue - microprocessor plasma torch height
controller that operates by analyzing voltage changes in the plasma source due
to variations in height between the torch tip and the material being cut. The mi-
croprocessor makes determinations to raise or lower the torch based off of the
strength of the voltage signal being read. It is equipped with an easy to read LED
display and two user friendly keys making operation simple and does not require
any additional measuring instruments. The device has patented solutions made
with the highest quality components to ensure a safe, durable, and reliable long-
term operation.
Top layer view:
Characteristics:
Supply voltage (V)
Plasma volatge input
Plasma voltage threshold
Plasma interface
I/O interface
Supported plasma ratio
Display
Weight
Dimensions L*W*H (mm)
AQTRONIC
THC102MX Operation manual
Typical
9-36VDC
0-350V
40V
Optical Isolated
Active Low Optical Isolated
1:1 / 1:100
8 bit 7 Segments
10 0g
8 0 * 80 * 23
1
http://www.aqtronic.com
Bottom layer view:
Max
48VDC
450V
2 50V
-
-
-
-
-
-