2VV ESSENSSE NEO BASIC 설치 및 작동 지침 매뉴얼 - 페이지 10
{카테고리_이름} 2VV ESSENSSE NEO BASIC에 대한 설치 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2VV ESSENSSE NEO BASIC 14 페이지.
페이지 인쇄2. EXTERNAL ACCESSORIES
2.1 CONNECTING EXTERNAL ACCESSORIES
PLEASE NOTE
The unit must be disconnected from the power supply to connect accessories.
•
All external control components must be connected according to the wiring diagram.
•
The connectors must be connected to the electrical board with adequate force and always perpendicular to the base.
•
2.1-1 DS door contact
TECHNICAL INFORMATION
– suitable for all BASIC regulation
- Isolated break contact with maximum voltage 230V, 6A
- IP67, can be connected as a break or switching contact
Connectors for control modules: DS / DS
CAUTION!
Not included with the product.
2.1-5 Room thermostat - TER-P
Room thermostat -TER-P
- Room thermostat to regulate heating
– Cable - Two-core cable with a cross-section of 1,5 mm
Connectors for control modules: Th / Th
ATTENTION!
Not included with the product.
10
, 230 V/ 50 Hz.
2
°C