Aqua Clear 30 사용 설명서 - 페이지 5

{카테고리_이름} Aqua Clear 30에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Clear 30 13 페이지. Power filter

페이지 인쇄

AQUACLEAR

MODEL #

Maximum Flow Rate 100 gph

Minimum Flow Rate 33 gph

Watts

RPM

Always unplug the Aquaclear

and discard water remaining in the filter case. Thoroughly rinse collected debris from the

case, impeller cover and impeller assembly in clear lukewarm water. The intake "U" tube and

extension tube can be cleaned with a filter stem brush to remove any buildup of deposits.

When all parts have been cleaned and thoroughly rinsed, reassemble filter and replace onto

aquarium.

(See Quick Start Guide 2, 3 and 4.)

Follow operating

instructions to restart and

prime Power Filter.

(See Power Filter Start-Up.)

Every three months, the

motor should be

thoroughly cleaned.

Remove cover, filter basket

and discard water

remaining in filter case.

Remove motor by twisting

a 1/4 -turn gently in the

direction of the arrow on

front. Ease motor down

slowly to prevent damage

to the filter and motor

guide.

Pull impeller out of impeller

well and rinse to remove

accumulated slime deposits.

A cotton swab or impeller

well brush (not supplied)

can be used to remove

more stubborn deposits.

Wet motor seal ring to

prevent damage before

placing into filter case.

POWER FILTERS FLOW RATES

150 gph

378 lph

568 lph

50 gph

125 lph

190 lph

6 Watts

3600 rpm

POWER FILTER MAINTENANCE

Power Filter prior to cleaning. Remove cover, filter basket,

200 gph

300 gph

757 lph

1135 lph

66.6 gph

100 gph

250 lph

380 lph

6 Watts

3600 rpm

110

500 gph

1890 lph

166.6 gph

630 lph

14 Watts

3600 rpm