Dexin KS-28103 사용자 설명서 - 페이지 11

{카테고리_이름} Dexin KS-28103에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dexin KS-28103 13 페이지. 2.4ghz multimedia keyboard mouse set

upon the completion of channel switching. Normally, the effective transmission

distance is about 3 feet, depending on the environment. If the effective

distance between the mouse and the receiver is bad, try to change the

location of the receiver.

4. If you have difficulty connecting the wireless mouse:

Increase the distance between the set of wireless mouse and other radio

device units.

Turn off the other wireless devices, or their base units that are in close

proximity to the receiver of this wireless mouse. Try connecting the wireless

mouse and its receiver again. To verify that your device is connected and

working properly, open a document and try the device.

5. My keyboard or mouse does not work or does not work properly after

installation

Make sure you have connected the receiver correctly. For optimal

performance, place the receiver at least 8 inches or 20 centimeters away from

other electrical devices, such as the computer, the computer monitor, or

external storages devices.

Make sure you have installed the batteries correctly.

Make sure you have set the same ID on both transmitter (mouse and

keyboard) and the receiver (see setting the ID under Hardware Installation).

If the problem persists, try an alternative ID selection to avoid possible

interference. Remember to set the same ID or both transmitter and receiver.

6. My keyboard or mouse is not detected

Make sure you have connected the receiver correctly. Do not plug or unplug

the receiver cables while the computer is running. You may have other system

devices that conflict with the mouse and keyboard. Check the IRQ / address

settings of these devices for conflicts and change the settings as required.