AvL Technologies iDirect 인터페이스 및 참조 매뉴얼 - 페이지 5

{카테고리_이름} AvL Technologies iDirect에 대한 인터페이스 및 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AvL Technologies iDirect 16 페이지.

iDirect Modem

2.3.1. Serial Communication Connection

To communicate with the iDirect modem through a serial connection, connect the serial cable from the AAQ antenna

system to the Console port on the modem. Connect power to all devices. Confirm that the serial port settings are

correct per section 3 of this document.

Figure 2 – Serial Setup

When setting the system to communicate by Ethernet, connect both the controller and the iDirect modem to the AvL

CIP or other network switch so the controller can query the modem over the network. Ensure power is connected to

each device. Confirm that the Ethernet settings are correct per section 3 of this document.

Figure 3 – Ethernet Setup

AvL Technologies

| Proprietary – Content is Subject to Change without Notice