Aqua Computer Aquaduct 240 eco 작동 및 조립 매뉴얼 - 페이지 15

{카테고리_이름} Aqua Computer Aquaduct 240 eco에 대한 작동 및 조립 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Computer Aquaduct 240 eco 20 페이지. Aquaduct eco series

Pin 3: rpm signal

7.4. Connector „fan" (aquaduct 240 eco mark II AC 230 V only)

The integrated fans of the aquaduct 240 eco mark II AC 230 V must be

powered through this connector. Therefore connect this terminal to a

suitable fan power connector of your motherboard or a fan controller

using the supplied connection cable. For details please refer to the

manual of motherboard or fan controller. Definitely check the fans for

correct operation! Without active fans, the aquaduct and any connected

component can overheat and be permanently damaged!

Pin assignment Pin 1: GND

Pin 2: 0-12 V

Pin 3: rpm signal

7.5. Connector „external standby"

Without function for the aquaduct eco model series.

7.6. Connector „alarm/relay"

7.6. Connector

„alarm/relay"

Without function for the aquaduct eco model series.

7.7.Jumper „J1"

Without function for the aquaduct eco model series.

7.8. Connectors „temp sensor 1/2"

Without function for the aquaduct eco model series.

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen, Germany

AQUADUCT ECO

- 15 -