Aqua Computer Aquaduct 360 eco 작동 및 조립 매뉴얼 - 페이지 9

{카테고리_이름} Aqua Computer Aquaduct 360 eco에 대한 작동 및 조립 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Computer Aquaduct 360 eco 20 페이지. Aquaduct eco series

• A complete cooling circle consists of the aquaduct and one wa-

ter cooler at the minimum.

5. Use of the plug&cool connectors

on the connector it will be between 18 and 20 mm.

Our plug&cool connection system makes a secure fit-

ting of the hoses possible without any tools. It is pres-

sure and temperature resistant. Please observe the fol-

lowing instructions for the fitting:

1. Cleanly cut the hose to the desired length.

The hose should be cut evenly

burs with a sharp knife or a hose cutter (available in

burs

our shop). After each detachment of the hose from a

connector the first two centimeters have to be cut off to

guarantee a secure operation.

2. Insert the hose into the connector up to the limit

stop.

When inserting the hose, a first limit stop will be felt

which has to be overcome with some effort. If you want

to be on the safer side, you can mark the hose with a

felt tip pen up to where you have to insert it. Depending

If the hose has to be detached, please do

the following:

1. Push down the black or blue plastic ring

on the connector. For this purpose you

can also use the separately available AC

Multi-Tool. Slip it over the hose with the

middle opening.

2. While pushing down

While pushing down pull the hose from

While pushing down

the connector.

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen, Germany

AQUADUCT ECO

evenly and cleanly avoiding

evenly

avoiding

- 9 -