Dexter Laundry COIN COMPACT DRYER 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Dexter Laundry COIN COMPACT DRYER에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dexter Laundry COIN COMPACT DRYER 17 페이지.

V. Top

VI. Floor

Refer to the label attached to the Belt Guard on the rear of the dryer for other installation

information and start-up instructions.

Refer to figure labeled "Vertical Clearance Dimensions".

AB. 0 clearance is allowable at the top; 4 in. (102 mm) back from the

front. However 1/4 in. (6 mm) clearance should be allowed in case the

dryer needs moving.

C. 10 in. (254 mm) clearance is required from top at all other points.

If used as a stand alone dryer, this unit is intended to be installed upon an

elevated surface. The surface must be of suitable strength to support 450

pounds (205 kg), and the dryer should be bolted or anchored to prevent

horizontal movement. The dryer may be installed upon a combustible

surface.