Aqua Cooler AC-MINICOOLER 사용 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Aqua Cooler AC-MINICOOLER에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Cooler AC-MINICOOLER 13 페이지. Mini cooler

Installation Instructions

Component identification and content check list:
Filtered Water Cooler
Ref
Description
1
Drip Tray
2
Body
3
Chilled Water Tap
4
Indicator Light
5
Filtered Water Chamber
6
Unfiltered Water Chamber
7
Filter Cartridge
8
Lid
9
Filter Change Indicator
Not Shown
Drain Plug (underneath unit)
Not Shown
On/Off Switch (back of unit)
Sanitising Instructions Prior To Use - Recommended
It is recommended to follow the flushing procedure below to prime your system ready for use.
Flushing Procedure
1.
Combine two tablespoons of Baking Soda; bicarbonate soda, with 2 litres of luke-warm water into a
separate jug or container and set aside.
2.
Remove the unfiltered water chamber from the cooler, including the filter.
3.
Pour the bicarbonate mixture into the filtered water chamber.
4.
Hold the Chilled Water Tap in until water comes from the tap. This ensures the mixture has entered the
internal water tank.
5.
Cycle the bicarbonate mixture through the front taps and re pour back into the top reservoir. Repeat this
process a couple of times.
6.
Turn power on and allow the solution to sit in the cooler for a minimum of 4 hours (ideally leave
overnight).
7.
Drain all the bicarbonate mixture out through the Chilled Water Tap until you can no longer drain any
water.
8.
Remove the Drain Plug from underneath the unit to drain any excess water in the cooling tank. This is
important to ensure all of the mixture is removed from the cooler.
9.
While the Drain Plug is open, pour 2L of water through to remove any excess bicarbonate mixture from
the system. Reinstate drain cap and Unfiltered Water Chamber.
10. Flush clean water through the unit and drain out via tap. Tilt the unit back and forth to remove trapped
water from unit.
5