A.H. Systems AK-40G 운영 매뉴얼 - 페이지 10

{카테고리_이름} A.H. Systems AK-40G에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A.H. Systems AK-40G 20 페이지. Antenna kit

A.H. Systems AK-40G Antenna Kit

OPTIONAL EQUIPMENT

The AK-40G case comes with three additional cutouts for optional

preamplifiers. In order to improve overall system sensitivity, the following

equipment will be required:

PAM-0118P Preamplifier 20 MHz – 18 GHz

The preamplifier will increase the system sensitivity 37 dB and is recommend

for the SAS-510-2, SAS-530,542 and SAS-571. An optional short length

cable (SAC-18G-0.5), is required to connect the preamplifier to any 50-ohm

receiver or spectrum analyzer.

SAC-18G-0.5 Low-Loss Cable up to 18 GHz

The Low-Loss, High Frequency cable is recommended for connecting the

optional preamplifier to any 50-ohm receiver or spectrum analyzer. Our Low-

Loss High-Frequency flexible cables are the preferred choice over standard

cable types. With improved power handling, low VSWR, and high frequency

capabilities, the Low-Loss cables can be made to your specified length and

delivered in two days. The 0.5-meter SAC-18G-0.5 has a typical attenuation

of 1.0 dB at 18GHz.

PAM-1840 Preamplifier 18 GHz – 40 GHz

The preamplifier will increase the system sensitivity 20 dB and is recommend

for the SAS-574. An optional short length cable (SAC-40G-0.5), is required

to interconnect the preamplifier to any 50-ohm receiver or spectrum analyzer.

SAC-40G-0.5 Low-Loss Cable up to 40 GHz

The Low-Loss, High Frequency cable is recommended for connecting the

optional preamplifier to any 50-ohm receiver or spectrum analyzer. Our Low-

Loss High-Frequency flexible cables are the preferred choice over standard

cable types. With improved power handling, low VSWR, and high frequency

capabilities, the Low-Loss cables can be made to your specified length and

delivered in two days. The 0.5-meter SAC-40G-0.5 has a typical attenuation

of 4.5 dB at 40GHz.

• PAM-0118P with an SAC-18G-0.5

• PAM-1840 with an SAC-40G-0.5