A.H. Systems BCP-611 운영 매뉴얼 - 페이지 7

{카테고리_이름} A.H. Systems BCP-611에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A.H. Systems BCP-611 9 페이지. Antenna kit

A.H. Systems AK-4G Antenna Kit

TRIPOD AND MOUNTING ADPTERS

ATU-510 Tripod

AEH-510 Azimuth and Elevation Head

The azimuth and elevation head (AEH-510) mounts to the tripod (ATU-510) top

and allows the antennas to be rotated 360 degrees and tilted between horizontal

and vertical polarization. The tripod and azimuth and elevation head come in their

own carrying case. Each tripod leg is independently adjustable in angle and length

to facilitate antenna height setting. The tripod legs have a rubber tip on one end for

indoor or hard surface use, and a metal spike on the other end for outdoor soft

surface (such as dirt) use.

TRANSIT STORAGE CASES

TCC-510 Tripod Carrying Case

TSC-542 Transit Storage Case

The antenna carrying case (TSC-542) prevents damage and loss of antennas

when storing or transporting the antenna kit. The case is constructed of lightweight

and durable polyethylene. Two case keys are provided with the case.

OPTIONAL EQUIPMENT

The AK-4G case comes with three additional cutouts for optional preamplifiers.

In order to improve overall system sensitivity, the following equipment will be

required:

PAM-0204 Preamplifier 20 MHz – 4 GHz

The preamplifier will increase the system sensitivity 24 dB and is recommend for

the SAS-510-4 and SAS-530,542. An optional short length cable (SAC-211-0.5), is

required to connect the preamplifier to any 50-ohm receiver or spectrum analyzer.

REV B

•

PAM-0204 with an SAC-211-0.5