Aqua Creek water rider 3 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Aqua Creek water rider 3에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek water rider 3 9 페이지. 330 lb. [150 kg] maximum weight capacity

Pool Bike Maintenance

The WR3 is made of marine quality AISI 316L stainless steel. Its anti-corrosion

treatment makes it suitable for chlorinated water, seawater and thermal waters.

It does not require any special care in pH-controlled water (6.7 / 7.6).

1. Remove the bike once a week and rinse it thoroughly with soft water, not

pool water.

2. Regularly check the pH of your swimming pool.

3. Remove the bike during manual dosages of chemical products or chlorine

stock treatments. Keep the bike away from chemicals to avoid any splashing

which can stain or cause deposits.

4. Deposits of powder, salt, and other corrosive products will speed up the

corrsion process.

5. When cleaning the surfaces of the swimming pool it is advised to remove

the bike from the pool in order to avoid any risk of stains or deposits.

6. When you are not using the bike, it must be rinsed thoroughly with soft

water, then dried and stored in a location away from chemical products.

7. If there are lime-scale deposits or stains, they can be removed with a

polishing cleaner for stainless steel and a non-abrasive soft cloth. Then wash

the bike with clean water and dry it completely.

Revised 5/1/2015