A.H. Systems SAS-542 운영 매뉴얼 - 페이지 6

{카테고리_이름} A.H. Systems SAS-542에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A.H. Systems SAS-542 13 페이지. Biconical antenna
A.H. Systems SAS-542에 대해서도 마찬가지입니다: 운영 매뉴얼 (9 페이지)

페이지 인쇄

A.H. Systems SAS-542 Biconical Antenna

OPERATING INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

The SAS-542 Biconical Antenna is shipped with the elements detached from

the balun. Attach each element to the Biconical balun tee assembly.

MOUNTING INSTRUCTIONS

The SAS-542 biconical antenna is supplied with an ABC-B Balun mounting

clamp. The ABC-B has a 1/4-20 mounting holes on the base of the clamp.

Attach the antenna to the ABC-B mounting clamp, azimuth and elevation head

(AEH-510) through the screw hole in the antenna base. The azimuth and

elevation head (AEH-510) mounts to the tripod (ATU-510) top and allows the

antennas to be rotated 360 degrees and tilted between horizontal and vertical

polarization. Each tripod leg is independently adjustable in angle and length to

facilitate antenna height setting. The tripod legs have a rubber tip on one end

for indoor or hard surface use, and a metal spike on the other end for outdoor

soft surface (such as dirt) use.

Mount the antenna such that the elements are parallel to the ground for

horizontal polarization testing, or perpendicular to the ground for vertical testing.

The horizontal beamwidth of the biconical antenna is approximately 60 degrees

and it should be pointed or aimed in the direction that the received signal is

coming from.