Avlite AV-SIGN-20 설치 및 서비스 매뉴얼 - 페이지 7

{카테고리_이름} Avlite AV-SIGN-20에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avlite AV-SIGN-20 16 페이지. Solar sign light

The AV-SIGN-20 can be mounted directly into the ground with frangible stake mounts or to a post

depending on your application.

Installing the Light Assembly to the Frangible Stake Mounts (AV-SIGN-20-FM)

The completed AV-SIGN-20-FM assembly can be mounted on stakes in firm soil (not loose sand,

screenings or other unbound material).

a. Lay the AV-SIGN-20-FM on its side where it is to be located and mark the position for each

frangible stake.

b. Use a sledge hammer to drive the stake into the soil at the chosen location. Drive the stake down

until the bottom of the stake sleeve is at ground level.

c. Fit the boss of the mount plate into the shorter barrel of the frangible sleeve. Using a 6mm Allen

key, tighten the socket head cap screw against the stake mount boss.

d. Fit the AV-SIGN-20-FM on top of the 2 x stakes. The longer barrel of the frangible sleeve should

completely cover the stake sleeve. Using a 6mm Allen key, tighten the bottom socket head cap

screws against the stake sleeve.

e. Position and mount the lights as required.

Frangible\~Sleeve

Stake

Installation

Latest products and information available at www.avlite.com

448.5

332

AV-SIGN-20

Solar Sign Light