Aqua Creek Products F-12PPL-HD-AT1-05 사용 설명서 - 페이지 5

{카테고리_이름} Aqua Creek Products F-12PPL-HD-AT1-05에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products F-12PPL-HD-AT1-05 14 페이지. Portable lift

6. Fill the ballast tank with sand (not included) outlined in FIGURE 3 below. Gently shake

or tap the tank sides periodically to help level the sand. Alternate between fi ll ports to

make sure sand is evenly distributed (use a large size funnel to help in this step).

7. With the counter weight now in place, deploy the lift from the cart so that the lift is in

operation mode.

DO NOT OPERATE LIFT IN THE TRANSPORT MODE!

8. Operate the lift without a load to verify that the lift will operate properly in the selected

location. Check that there is enough clearance between the lift seat and the pool wall as

the chair extends into the water.

9. When lift is confi rmed to be in a proper location, a facility may choose to install a

fi xing kit. A fi xing kit will aﬃ x the lift to the deck and is required for most commercial

applications to be ADA compliant. See following page for detailed instructions.

Patriot-AT1 Assembly Instructions

USE A LARGE FUNNEL

TO FILL TANK WITH

"ALL-PURPOSE" SAND

WARNING! DO NOT OPERATE THE LIFT

BEFORE FILLING THE BALLAST TANK

REMOVE SCREWS &

CAPS FROM BOTH

HOLES TO FILL TANK.

BALLAST TANK

FILL BALLAST TANK

WITH 12, 50lb BAGS OF

"ALL-PURPOSE" SAND.

OR, AT A MINIMUM, FILL

THE TANK WITH 600lbs OF

"ALL-PURPOSE" SAND.

REPLACE SCREWS & CAPS

WHEN TANK IS FILLED.

FIGURE 3

Revised 6/18/19