Aqua Creek Products F-RNGR2-02 매뉴얼 - 페이지 13

{카테고리_이름} Aqua Creek Products F-RNGR2-02에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products F-RNGR2-02 16 페이지. Pool lift

페이지 인쇄

Problem:

The lift won't move.

Solution:

1. Make sure the cords are properly plugged in:

NOT Properly Inserted:

The cord plug is flush with

or sticking out of the outlet

2. Check the contact points:

Make sure the contact point of the control box

and the battery are not damaged or corroded.

If there is corrosion clean with Scotch-Brite

pad. Put some dielectric grease on the contact

points before reattaching the battery.

Problem:

The lift stopped moving and is stuck.

Solution:

1. Press the Emergency button

Press the emergency retract

button on the front of the

control box to retract the lift.

Note: the lift will not retract

if the battery is not fully

charged or if the control box

is not working. The emergency

button only overrides the

remote handset.

Note: If you feel your lift is malfunctioning due to a faulty battery

or connections, contact Aqua Creek Products for a testing kit.

Basic Troubleshooting

Properly Inserted:

The cord plug is recessed

into the outlet

Check the ends of the cords for corrosion or

damage. The cord plugs should be recessed

into the outlet. You should feel them pop into

place when they are correctly inserted.

3. Make sure the battery is fully charged:

The Charger is ON

when the green

light is glowing

The Battery is

CHARGING when the

orange light is glowing

When the Battery

is fully charged the

orange light will stop

glowing

Revised 6/17/19