AVM A 30.3 사용 설명서 - 페이지 15

{카테고리_이름} AVM A 30.3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVM A 30.3 20 페이지. Integrated amplifier
AVM A 30.3에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

2.8 Sound settings (Bass/Treble)

By pressing and holding the balance button BAL (8) the right-left balance of the output signal

can be adjusted globally for all input channels by means of the volume control (9). The current

setting is shown in the display (6) on the right side while the BAL button is pressed. As soon

as you release the button, the set value is stored and the unit returns to its normal operating

state.

The integrated tone control electronics for adjusting the bass or treble components of the A

30.3 is activated as soon as you make a setting under BASS or TREBLE. If a neutral setting

(BASS = 0, TREBLE = 0) is selected, the tone control electronics will remain deactivated until

one of these parameters is changed. The display will show TONE ON when the tone control is

activated and LINEAR when it is deactivated.

The RESET option offers you the possibility to reset the device to the original delivery state

and thus to all factory settings. The following settings are reset in the course of a RESET:

ü Individual input sensitivities (level settings). For details see section 2.6.

ü Cross-channel adjustments of the right-left balance (see section 2.7) and the bass/treble

sound settings (see section 2.8)

ü AV Pass Through function for high level inputs (13,15) (see section 1.11)

Die RESET Option bietet Ihnen die Möglichkeit, das Gerät in den ursprünglichen

Auslieferungszustand und damit auf alle Werkseinstellungen zurückzusetzen. Folgende

Einstellungen werden im Zuge eines RESETS zurückgesetzt:

ü Individuelle Eingangsempfindlichkeiten (Pegeleinstellungen). Details siehe Abschnitt 2.6.

ü Kanalübergreifende Anpassungen der Rechts-Links-Balance (siehe Abschnitt 2.7) und der

Bass/Treble-Klangeinstellungen (siehe Abschnitt 2.8)

ü AV Pass Through Funktion für Hochpegel-Eingänge (17,19) (siehe Abschnitt 1.11)

To perform a RESET, switch off the device with the mains switch (22) on the back. Then press

and hold the TREBLE button (3) and the LEVEL button at the same time and switch the unit

on again with the power switch (22) on the back. Now press the BAL button (8) to perform the

RESET or BASS (4) to cancel the process. Wait until the unit changes to standby mode. Your

A 30.3 integrated amplifier is now reset to its factory settings.

The A 30.3 integrated amplifier is equipped with an energy-saving automatic power-off function

(SET AUTO OFF FUNCTION). If no music is played for a period of 20 minutes or no function

is activated on the unit, the A 30.3 automatically switches to standby mode. By pressing the

on/off button (2) the unit can of course be switched on again at any time.