Aqua Creek Products F-830-02 매뉴얼 - 페이지 8
{카테고리_이름} Aqua Creek Products F-830-02에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products F-830-02 10 페이지. Electronic conversion kit
페이지 인쇄Attach the battery to the control box and the
control box bracket. You should hear a "click"
when the battery is correctly mounted to the
bracket.
Once the battery has been connected
to the control box, connect the handset
cable, actuator cable and the motor
power cable in the fi rst three slots of the
control box. See fi gure to the right.
8
Copyright © 2019 Aqua Creek Products All Rights Reserved
Linak Battery and Cables Installation
BATTERY
CONTROL BOX
1
2
TAB TO
FRONT
HANDSET
CABLE
MAKE SURE
PLUGS ARE
FULLY SEATED
AS SHOWN
BELOW
MOTOR
POWER
CABLE
ACTUATOR
POWER
CABLE
Revised 8/22/19