AVM Evolution CD3NG 사용 설명서 - 페이지 7
{카테고리_이름} AVM Evolution CD3NG에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVM Evolution CD3NG 10 페이지.
페이지 인쇄2.3 Installation and cooling
The CD3NG doesn't produce much heat. You can put it in a rack as well as in a closet. Direct exposure to
sunlight is not recommended because this will heat up the CD3NG.
2.4 Connection to mains
Connect the player to the mains outlet by using the power cord which is delivered together with the unit.
Make shure that mains voltage is according to the value printed on the rear panel of the player (near mains
connector). Let it be switched off until all audio connections are made.
2.5 Connection to an amplifier
The analogue outputs (17) of the CD3NG deliver fixed signal levels. Connect them to the high level inputs of
a a preamp or integrated amp.
The RCA-cinch outputs and the balanced XLR outputs are fully decoupled from each other and can be used
independently.
2.6 Connection to digital recorders / external DACs
Connect the digital outputs (14) to the inputs of your digital recorder or external D/A-converter.
CAUTION: Never connect the digital outputs to an analogue amplifier. The high frequencies can damage
Your amplifier or loudspeakers.
REMARK: Thus the internal D/A-converter works with up to 192 kHz / 24 bits the CD3NG digital outputs
send digital data with the fixed CDA-format 44,1 kHz / 16 bits.
2.7 External IR-remote control
The CD3NG can be connected to an external IR-receiver. Use the IR-Jack (21). The plug is a 3,5mm stereo
headphone plug. Connect it according to sketch in chapter 2.2.
7