Aqua Creek Products TIDALWAVE F-TWPB-06 매뉴얼 - 페이지 7

{카테고리_이름} Aqua Creek Products TIDALWAVE F-TWPB-06에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products TIDALWAVE F-TWPB-06 14 페이지. Pool bike pink, green or yellow 300 lb. 136 kg maximum weight capacity

페이지 인쇄

The Tidalwave Pool Bike was designed for use in and out of the water. To use in water, use the wheels at

the front of the bike to roll the bike down the pool wall into the water. Optimal water depth is 3-5 feet

(0.9 to 1.5 meters). See FIG. 9 & FIG. 10 below.

FIGURE 9

The Tidalwave pool bike can be set to multiple levels of resistance. The resistance adjustment knob is

located on the main frame. To increase resistance for a harder workout, turn the knob clockwise. To

decrease resistance, turn the knob counter-clockwise. See FIG. 11 and

FIG. 12 below.

NOTE: Always begin pedaling on the easiest level and increase resistance to more di cult settings

while pedaling. Never start pedaling at high resistance as you may experience a transmission bind

up. However, if this does occur, release the resistance back to easy and begin again.

RESISTANCE

ADJUSTMENT

ROD

Tidalwave Operating Instructions

PLACE IN WATER

RESISTANCE

ADJUSTMENT

KNOB

FIGURE 11

FIGURE 10

ROTATE TO

INCREASE

RESISTANCE

*Frame not shown for clarity

ROTATE TO

DECREASE

RESISTANCE

FIGURE 12

Revised 10/30/19