AvMap EGT probe 경고 및 설치 매뉴얼 - 페이지 2

{카테고리_이름} AvMap EGT probe에 대한 경고 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AvMap EGT probe 4 페이지. Thermocouple type k (cr-al) ungrounded

1. Disclaimer & Warning

AvMap disclaims any liability deriving from an improper use or installation of the thermocouple

sensor, in a way that may violate the flight and navigation rules, regulations and safety.

It is highly recommended that the installation of connection threads and thermocouple sensors on

the engine will be performed by a qualified aviation maintenance technician. Consult the engine

installation manual, your Rotax Maintenance Centre and/or aircraft manufacturer for a correct

installation of the thermocouple sensor on the engine.

2. Introduction

AvMap EGT probes are thermocouple sensors meant to measure the exhaust gas temperature of

the engine. AvMap EGT probes are compatible with AvMap EngiBOX, the engine monitoring system

for carbureted Rotax aircraft engines.

3. Package content

1x AvMap EGT probe - Thermocouple type K (Cr-Al) ungrounded

1x M8x1 weld boss

4.1 AvMap EGT Probe - Thermocouple type K (Cr-Al) ungrounded

● Thermocouple type: K (Cr -Al) composed of alloys containing nickel

● Sheath: Inconel 600 Ø 3 mm x 30 mm (Ø 0.12" x 1.18")

● Measuring junction type: Insulated hot junction in MgO

● Temperature range: -270°C / 1370°C (-454°F / 2498°F)

● Accuracy: According to DIN_IEC 584-2 class 2

● Connection thread: M8x1 screw-in type

● Cable length: 2,5 m insulated in silicon

4.2 M8x1 weld boss

● Connection thread: M8x1

● Diameter: Ø 15 mm (0.59")

● Cut-out diameter: Ø 12 mm (0.47")

● High: 11 mm (0.43")

● Material: stainless steel (INOX)