AVMATRIX VS0601U 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} AVMATRIX VS0601U에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVMATRIX VS0601U 16 페이지. Mini 6 channel multi-format streaming video switcher

5.3. Transition Control

There are two transition control types for this video switcher: Transition without effects and Transition with

effects.

1) Transition without Effects

CUT performs a simple immediate switch between Preview and Program views. This is no delay

seamless switching and the selected transition effect WIPE, MIX or FADE is not used.

2) Transition with Effects

AUTO performs an automated switch between Preview and Program views. The timing of the transition is

set by the chosen speed button. The selected transition WIPE, MIX or FADE will also be used.

T-Bar manual transition performs like AUTO, but it is more flexible that the timing of the transition depends

on the speed of the manual switch.

Press FTB button it will fade the current video Program source to black. The button will flash to indicate

that it's active. When press the button again it acts in reverse from complete black to the currently

selected Program video source, and button stop flashing. FTB is usually used for emergency condition.

Note: When the PGM window display black and keep black even after transition, please check if the FTB

button flashing. Press the button again when it is flashing to stop black.

Pressing the MIX button selects a basic A/B Dissolve for the next transition. When button LED turns on it

is active. Then use T-Bar or AUTO to operate the transition. The MIX transition effect as below