Dexton DX-20236 조립 설명서 및 사용자 설명서 - 페이지 3

{카테고리_이름} Dexton DX-20236에 대한 조립 설명서 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dexton DX-20236 4 페이지. Deluxe roadster pedal car

INSTALLATION INSTRUCTIONS

headlight

power switch

Hole

battery box is located

in front of the pedals.

Spare Wheel

Insert the M5 x 10 screw through the big

bumper washer and front bumper. Then attach

the front bumper to the bumper support

bracket. Secure the bumper with the M5 x 1

washer and tighten with the M5 hex nut.

Attach the steering wheel to the steering

column. Put the M12 washer on the column

and screw on the M12 dome head nut.

Tighten with a wrench or spaner.

Open the battery compartment lid

(located in front of the pedals) and

insert 2 x 1.5V "D" batteries. Close

the lid and lock with the two nuts.

Push the headlight power button on

the dashboard to turn the headlights

on and press again to turn off.

1.5V x 2

"D" Battery

Remove all parts from the support

axle and insert it through the back hole

underneath the vehicle. Then insert the

black column, washer x 1, nut x 1 and

the spare back wheel. Secure the wheel

with the M12 washer and M12 dome

head nut. Put the wheel hub cap on by

bending down the three tabs.

Do not mix old and new

batteries or batteries of

different types: alkaline,

standard (carbon-zinc) or

rechargeable nickel-cadium).